2 cond Wire for CueStation

0
The cut sheet for the 2-wire Cue Station calls out for using a 2wire 16AWG wire and also lists Belden 8719. Belden 8719 is a 2 wire 16AWG but also has a 18AWG drain wire. Is this conductor needed? If so, to what should it be connected? The ST-HUB does not have a terminal for it. As the cut sheet called out for 16/2 wire, I wasn't sure. Please clarify.
Responses (1)
  • Accepted Answer

    Friday, October 13 2017, 11:13 AM - #permalink
    0
    Stephen,

    The drain wire is not needed. Use only the two 16AWG conductors.

    Let us know if you have any other questions.

    George
    The reply is currently minimized Show
Your Reply