0

The CueServer Pro (CS-800) has an RS-232 port available for connecting to external equipment. The jack on the back of CueServer is a Female DB-9 type connector. It's electrical connections are as follows:

RS-232 Pin
Signal
Pin 1
n/c
Pin 2
Transmit Data from CueServer
Pin 3
Receive Data to CueServer
Pin 4
n/c
Pin 5
Ground
Pin 6
n/c
Pin 7
n/c
Pin 8
n/c
Pin 9
Optional +5V Power Output

By default, Pin 9 is not internally connected (n/c). If desired, Pin 9 can be configured to output +5V DC by shorting a jumper on the CueServer Pro PCB immediately behind the DB-9 jack. This jumper is labelled "5V-P9" on the PCB.

Responses (0)
  • There are no replies here yet.
Sorry, the discussion is currently locked. You will not be able to post a reply at the moment.