0

The pluggable terminal block that plugs into the back of the SceneStation is Phoenix part number 1881338.   It is a 3-position Spring Cage Terminal Block with a 2.5mm pitch.

It is designed to accept wires from 20-26 AWG.

For best results, strip the wire 8mm (0.3 inches).

To insert the wire, use a small tool to press the orange actuator to open the internal spring cage.  Then insert the wire.  After the wire is inserted fully, release the orange actuator.

Responses (0)
Sorry, but you are not allowed to view the replies here.
Sorry, the discussion is currently locked. You will not be able to post a reply at the moment.