DMX Modules

The CS-900 CueServer 2 Pro and the CS-920 CueServer 2 Mini use a unique field-replaceable DMX module system for allowing the DMX ports to be customized for each individual project’s needs.

The CS-900 ships with four blank plates covering the module slots. The CS-920 ships with two blank plates. Optional modules can be purchased and installed into each of these slots. Using CueServer Studio, each slot can be configured as a DMX input or output.

The following list shows the available modules:

Module Description DMX Pinout
alt MOD-X5F
5-Pin Female XLR
1 – Common
2 – Data -
3 – Data +
4 – NC
5 – NC
alt MOD-X5M
5-Pin Male XLR
1 – Common
2 – Data -
3 – Data +
4 – NC
5 – NC
alt MOD-X3F
3-Pin Female XLR
1 – Common
2 – Data -
3 – Data +
alt MOD-X5M
3-Pin Male XLR
1 – Common
2 – Data -
3 – Data +
alt MOD-RJ45
Ethercon RJ45
1 – Data + (White/Orange)
2 – Data – (Orange)
3 – NC (White/Green)
4 – NC (Blue)
5 – NC (White/Blue)
6 – NC (Green)
7 – Common (White/Brown)
8 – Common (Brown)
* Colors use T-568B Standard
alt MOD-TB-ST
Screw Terminals
1 – Data -
2 – Data +
3 – Common
alt MOD-TB-IDC
IDC Terminals
1 – Data -
2 – Data +
3 – Common