The Main Menu of the LCD appears when the Enter or Right button of the navigation switch are pressed. Use the Up and Down buttons to select a menu option, then press Enter or Right to choose the menu option. To exit a menu option, press Left.
The following table shows the Main Menu options:
|Macros||Displays a list of the available Macros in the current show that have the “Show in LCD Display” option selected. Any macro shown in the list can be activated.|
|Shows||Displays a list of the available Shows on the memory card. This menu also shows and allows the currently active show to be changed.|
|Clock Settings||Displays and allows adjustments to the current time and date, including time zone.|
|Network Settings||Displays and allows adjustments to the current network settings, including DHCP.|
|DMX Menu||Displays a list of DMX related functions.|
|System Information||Displays information about the hardware and firmware revisions, including license information.|
|Self Test|| Runs the built-in hardware self test routine. Two confirmation screens will appear before allowing the self test to run. See the Self Test section of this manual for instructions.
Warning: Executing the self test will interrupt the currently running show.