Park

Syntax

Command Description Return Value
Park Parks the selected channel(s) None

Abbreviation

None

Description

The Park command locks the current value of the selected channel(s) in the active playback fader. Parked channels cannot be changed by running cues or using the At command. Use the Park command to freeze one or more channels so future cues and/or commands have no effect on the channel level.

The Unpark command has the opposite effect as the Park command.

Visual Representation

In CueServer Studio, parked channels appear in the stage view with their channel numbers in red. Note that you can only see parked channels if the Stage View is set to display a specific playback fader. You will not see parked channels in either the input or output stage views.

alt

Examples

Park
Parks the currently selected channels in the currently active playback fader.

Channel 1>3+5>8 Park
Parks channels 1 through 3 and 5 through 8 in the currently active playback fader.

Playback 3 Channel * Park
Parks all channels in playback 3.

See Also