Toolbar

The toolbar in the Navigator Window contains several controls for managing CueServers.

alt

Each of the toolbar items are described below:

alt Open Show
Opens the currently selected CueServer’s Editor Window. The Editor Window is used for programming and configuration of a CueServer.

alt Open Web
Opens the currently selected CueServer’s web page in the default web browser.

alt Add Remote
Displays a dialog window that allows a remote CueServer to be added to the Navigator Window. This option is used to add CueServers that are not available on the local network, and are published on the Internet via a router’s port-forwarding settings. See Working With Remote CueServers for more information.

alt New Show
Creates a new show file for the selected CueServer.

alt Delete Show
Removes the selected show file from a CueServer. Please note that the currently active show file cannot be deleted.

alt Set Active
Makes the selected show file the active show. The active show appears in the list in bold with a blue checkmark besides it.

alt Identify
Activates the selected CueServer’s Identify Mode. When a CueServer is in Identify Mode, it’s LCD Display and Power LED will flash. Use this feature to help identify which CueServer is which in a complicated setup with multiple CueServer devices. See Identifying CueServers for more information.

alt Network
Displays a dialog window that allows the network settings of the selected CueServer to be changed. Use this option to change the IP Address, DHCP setting, and Device Name of a CueServer.

alt Clock
Displays a dialog window that allows the clock settings of the selected CueServer to be changed. Use this option to change the time zone, automatic and/or manual time settings of a CueServer.