Release v1.4.2 [March 17, 2016]

Version 1.4.2 (3/17/2016)

  • CueServer Studio 2
    • Feature Added a new Diagnostic Tools section to the Help menu. Two network analysis tools have been added:
      • sACN Network Monitor – Scans the network for active universes of sACN data. Shows the sources of sACN data on a particular network. Visualizes a chosen sACN source by showing the channel values as bar graphs or RGB pixels.
      • CueStation Network Monitor – Monitors and captures any CueStation button and/or indicator commands found on the network. Displays (or filters) each event based on event type, source, station or button.
    • Feature When switching to the Stage or Playback views, the command line is now always active.
    • Feature KiNET v2 now allows each port to be assigned it’s own separate IP Address.
    • Bug Addressed a problem that caused a crash when changing the number of buttons on a station while editing an offline show file.
    • Bug Addressed a problem that occurred when renaming the active show file, or a show with an open editor window.
    • Feature Changed the behavior of the Network Settings window to automatically adjust the gateway field when changing the IP Address and/or Subnet Mask to guarantee that the chosen gateway would always be reachable on the network.
    • Bug Addressed a problem with the System Log view on Retina displays that caused the text to appear very small.
    • Bug Addressed a problem that caused the Navigator Window to not become frontmost when right-clicking on the Device or Project lists [OS X Only].
  • Firmware
    • Feature Added an update routine that periodically refreshes indictor values in case a CueStation Hub misses update messages or is power cycled.
    • Bug Addressed a problem with CueStation Hub communications that occurred when setting many indicator values at once that could cause some indicators to not properly change value.
    • Feature The WRITE command now processes embedded C-style escape characters in the string.
    • Feature Changed the KiNET v2 driver to support separate IP Addresses for each port.
    • Feature Changed the behavior of the LCD Display’s Network Settings to automatically adjust the gateway field when changing the IP Address and/or Subnet Mask to guarantee that the chosen gateway would always be reachable on the network.
    • Bug Addressed a problem on the CS-900 that caused ports set to DMX Outputs to not be configured properly in certain circumstances.
    • Bug Addressed a problem that caused hardwired DMX and sACN inputs on the same universe to not be merged properly.
    • Bug Addressed a small memory leak that could occur when transmitting strings out one of the serial ports.
    • Bug Addressed a problem that caused the network time daemon to not start properly in certain circumstances.
    • Bug Adjusted the network time daemon parameters to generate less network traffic.
    • Feature Increased compiler optimization to improve overall system performance.