What is the CueServer Mini (CS-810) Expansion Port Pinout?
The CueServer Mini (CS-810) includes a high-density 44-Pin Female D-Sub connector as its I/O Expansion port to provide access to CueServer's contact closure inputs, low-voltage outputs, RS-232 ports, hard-wired DMX signals and more.
A small PCB is available (CS-IOB) that plugs into this jack that provides all of these signals on 48 terminal blocks which make field wiring easy and also provides pushbuttons and indicator LEDs for the contacts and outputs.
CueServer users may also make their own wiring that connects directly to this 44-Pin I/O Expansion port. A high-density 44-Pin Male D-Sub connector is required to attach to the CueServer's I/O port. The following table shows the signals on this connector:
Top Row Pin | Signal | Middle Row Pin | Signal | Bottom Row Pin | Signal |
1 | Contact 1 | 16 | Ground | 31 | Contact 2 |
2 | Contact 3 | 17 | Ground | 32 | Contact 4 |
3 | Contact 5 | 18 | Ground | 33 | Contact 6 |
4 | Contact 7 | 19 | Ground | 34 | Contact 8 |
5 | Output 1 | 20 | Ground | 35 | Output 2 |
6 | Output 3 | 21 | Ground | 36 | Output 4 |
7 | Output 5 | 22 | Reserved | 37 | Output 6 |
8 | Output 7 | 23 | Reserved | 38 | Output 8 |
9 | RS-232 TxA | 24 | Reserved | 39 | DMX Output + |
10 | RS-232 RxA | 25 | Reserved | 40 | DMX Output - |
11 | +5V DC Output | 26 | Ground | 41 | DMX Output Ground |
12 | +5V DC Output | 27 | Ground | 42 | DMX Input + |
13 | +12V DC | 28 | Ground | 43 | DMX Input - |
14 | +12V DC | 29 | Ground | 44 | DMX Input Ground |
15 | +12V DC | 30 | Ground |